Strainer

NRS Gate Valve

  • Valves comply with DIN3352
  • Metal seat
  • Inside screw
  • O-Ring stem seal
  • Handwheel operated
  • Flange to EN1902-2 PN6 or PN10
  • Face to face length in accordance with DIN3202-F4

Globe Valve

  • Valves comply with EN13789, MSS SP-85.
  • Metal seat.
  • Adjustable stem seal.
  • Packing replaceable under pressure.
  • Available with flanges EN1092- 2 PN6 PN10 or PN16, ANSI B16. 1Class 125 (Other types available on request).

Water Butterfly Valve

  • Single piece through shaft.
  • Vulcanized seat design for bubble-tight shutoff at 300 psi.
  • Flag type position indicator.
  • Low torque operation, high cycle life.
  • With built-in supervisory switch.
  • Top flange to ISO 5211/1.
  • UL Listed for size 2” – 12”.
  • FM Approved for size 2” – 6”.

NRS Gate Valve

  • Size DN50-DN600 PN16/Ciass 125
  • Valves comply with AWWA C509
  • Resliient Seailng.
  • Inside screw.
  • Superior stem packing with 0-rings.
  • With brass seailng bushing for size 14″ to 24.’
  • Packing replaceable under pressure.
  • With high strength integral thrust collar.

OS&Y Gate Valve

  • PN16/ Ciass 125
  • Valves comply with AWWA C515.
  • Resilient Sealing.
  • Outside screw.
  • Superior s tem graphite packing.
  • Packing replaceable under pressure.
  • Available with handwheel or gearbox(bevel or spur gearbox).
  • Available with flanges EN1092-2 PN10 or PN16. ANSI B16. 1 Class125 (0ther types available on request).

Wafer Double Door Check Valve

  • DN50-DN600 PN16/ Ciass125
  • The short face to face dimension and compact design of this valve allow installation and service in tight spaces.
  • Spring assisted for better dynamic behaviour.
  • Soft sealed for perfect tightness even at low differential pressure.
  • Available with flanges EN1092-2 PN10 or PN16. ANSI 616. 1 Class125

Automatic Air Vent Valve

  • Size 1/ 2″-1″ PN16
  • Small orifice of 1/16 in. (1. 6mm) to release air under pressure during normal pipeline operation.
  • The float is connected to the vient via a linkage mechanism which is capable of operating the vent under full pipeline pressure.
  • NPT or Metric thread of inlet.

Y-Strainer Flanged Ends 175 PSI

  • NPT or BSPT blowoff outlet on cover. Blowoff outlets are finished with plugs.
  • Screens are perforated 304 stainless steel with spot welded seam.
  • Recessed seat in body assures accurate screen alignment.
  • Flanges to ANSI B16.1 Class125
  • UL Listed.
Write to Us